, , ,

Rode SC6-L


 

Key Features:

  • Interviewers, Podcaster, Vloggers
  • Lightning Connector for iOS Devices
  • 2 x 3.5mm TRRS Microphone Inputs
  • 3.5mm Headphone Output for Monitoring
  • Up to 24-Bit / 48 kHz Resolution
  • Bus Powered / iPhone, iPad, iPod
  • Pairs with Rode Reporter App
  • Stereo or Dual-Mono Recording via App
  • Preamp Gain & Direct Monitoring via App
  • Works with Stock iOS Audio/Video Apps

$120

RODE SC6-L ULTRACOMPACT 2×2 LIGHTNING AUDIO INTERFACE FOR IOS DEVICES

Swiftly record two-person interviews, podcasts, and vlogs straight to your iPhone, iPad, or iPod with the RODE SC6-L ultracompact 2×2 Lightning audio interface and a pair of TRRS-equipped microphones (mics available separately).

Pocket-friendly and bus-powered, the SC6-L is perfect for keeping your setup small and simple while maintaining quality and enjoying app-based optimization.At one end of the SC6-L, you’ll find two 3.5mm TRRS jacks to accept signal from microphones such as the Rode smartLav+ lapel mic, Rode VideoMics (in conjunction with TRRS adapters), and third-party microphones with the appropriate TRRS outputs. Between the two TRRS jacks is a 3.5mm headphone output for monitoring the incoming signal to make sure it is clean and free of distortion.

At the other end of the interface, a short cable is terminated with a Lightning connector, which connects directly to your iOS mobile device to facilitate convenient and clear recording at digital resolutions up to 24-bit / 48 kHz, making it a broadcast-quality unit.

Use the SC6-L with the Rode Reporter app to change preamp gain, switch between summed stereo or dual-mono record modes, and turn direct monitoring on or off, all from your Apple mobile device (iOS 11 or later required). Alternatively, you can use the SC6-L with other audio/video apps such as the onboard Camera app, GarageBand, Voice Memos, and more.

  • Easy Two-Person Recording
    Strapped with the SC6-L and a couple TRRS microphones (available separately), you can easily capture two-person interviews, podcasts, and vlogs to your Lightning-equipped Apple mobile device in record time.
  • Dual 3.5mm TRRS Mic Inputs
    Separate 3.5mm TRRS mic inputs are provided on the SC6-L to accommodate two TRRS microphones such as the Rode smartLav+ lapel mic, Rode VideoMics (in conjunction with TRRS adapters), and third-party microphones with the appropriate TRRS outputs.
  • Real-Time Headphone Monitoring
    Connect earphones or headphones to the 3.5mm headphone port to monitor your input signal or the playback from a recording.
  • No Batteries Required
    Since the SC6-L is bus powered through the Lightning connection to your iPhone, iPad, or iPod, no batteries are needed.
  • App-Based Optimization
    When using the SC6-L with the Rode Reporter app, you can adjust the mic preamp gain, choose between summed stereo and dual-mono recording, and enable/disable direct monitoring from your Apple mobile device.
Brand

OS Requirements iOS 11 and higher
Bus Powered Yes
Direct Monitor Yes
Sample Rates 44.1/48 kHz
Bit Depth 24-bit
Simultaneous I/O 2/2
Computer Connectivity Lightning (iPhone/iPad/iPod)
Analog Outputs 3.5mm TRS Headphone Output
Output Connection 3.5mm Headphone Output
Power Requirements Powered from iPhone TRRS socket (2.7V)
Maximum SPL N/A
Equivalent Noise 25 dB Typical
Signal to noise Ratio 69 dB
Frequency Range 20Hz – 20 kHz
Polar Pattern Omni-directional
Active Electronics JFET
Material PC and ABS Plastic

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.