Panasonic PT-DZ21K2 Large-Venue 3-chip DLP? Projector

Panasonic

? 3-Chip DLP projection system; 16:10 Native aspect ratio

? 20,000 ANSI Lumen, WUXGA (1920 x 1200) native resolution

? 10,000:1 Contrast ratio, Powered zoom / focus lenses (optional)

? Video In: HDMI, 2 SDI, DVI-D, 5 BNC, VGA, Digital Link

? Built-in Wired network, 3D Sync In & Out, RS-232

? Support Active 3D projection, Portrait mode, Geometric adjustment, Vertical 360-degree installation, 24/7 operation and more

$93,499

High Quad-Lamp Brightness in a Compact Body
A unique high-power UHM quad-lamp system has allowed Panasonic to dramatically reduce cabinet volume and weight while setting the bar for brightness and image quality, particularly at events and for mapping applications.

Dynamic Iris for a High 10,000:1* Contrast Ratio
Panasonic?s Dynamic Iris uses a scene-linking aperture mechanism to achieve a remarkable 10,000:1* contrast without lowering its high brightness. This helps to reproduce deeper, richer blacks, and provides images with more detailed textures.

120 Hz Real Motion Processor Reduces Motion Blur
Real Motion Processor interpolates images for a 120 Hz* frame-rate. Smooth, stutter-free 120 Hz* reproduction is also possible using simultaneous inputs (two 3G-SDI inputs or DVI-D/HDMI combination). Together with a refined optical engine that enhances focus, Real Motion Processor delivers a better sense of resolution, contrast, and fluidity of motion.

Detail Clarity Processor 5
Proprietary circuitry analyzes individual video frames to identify and clarify areas of the image containing fine details and textures. Algorithms pull information from four frequency bandwidths, from super-high to low, to sharpen outlines, correct contours, and reduce ringing noise.

System Daylight View 3
Panasonic?s premium System Daylight View 3 stops pictures washing out in bright light and enhances impact in mapping and multi-projector applications. It uses sensor information to adjust sharpness, manipulate gamma curves, and correct colors to suit on-site conditions.

Low TCO in an Eco-Friendly Design
These projectors are designed to reduce the total cost of ownership (TCO) by extending replacement of consumable parts, such as lamp and air filter. Further, environmentally friendly features allow the user to reduce power consumption.

Quad-Lamp System Delivers Stable Operation
The quad-lamp system allows the projector to keep working even if a lamp should fail. Lamp Relay Mode alternates lamp operation to enable efficient and reliable 24/7 projection. Quad, Triple, Dual, and Single Lamp modes can also be used.

Single-Cable DIGITAL LINK Connection
DIGITAL LINK transmits uncompressed video, audio*1, and control commands through a single CAT 5e or higher STP cable for distances of up to 150 m (492 ft)*2. Optional DIGITAL LINK Switcher or Digital Interface Box further simplifies installation, reduces cabling and associated costs, and enhances reliability.

Backup Input Setting Assures Picture Display
Projectors switch instantaneously to a backup input signal should the primary input signal be disrupted*, assuring image display is maintained at all times in venues such as control rooms and adding insurance at events where projection must not be interrupted.

Vertical 360-degree Installation
The lamp-based projector unit can also be rotated 360 ? vertically to accommodate specific installation requirements.

Common Lenses for Panasonic 3-Chip DLP? Projectors
Panasonic 3-Chip DLP? projectors share a range of optional lenses, including ultra-short-throw lens and zoom lens for long throw distances, reducing cost of ownership for staging and event companies with large projector inventories.

Category:
Brand

Power supply 200–240 V AC, 50/60 Hz
Power consumption 2,060 W (0.3 W with Standby Mode set to Eco*1, 4 W with Standby Mode set to Normal)
Refresh rate 120 Hz*2
Panel size 24.4 mm (0.96˝) diagonal (16:10 aspect ratio)
Display method DLP™ chip x 3, DLP™ projection system
Pixels 2,304,000 (1920 x 1200) x 3, total of 6,912,000 pixels
Screen size (diagonal) 1.78–25.4 m (70–1,000˝), 3.05–15.24 m (120–600˝) with ET-D75LE90, 1.78–15.24 m (70–600˝) with ET-D75LE8, 16:10 aspect ratio
Resolution 1920 x 1200 pixels
Supported RGB signal XGA–WUXGA
Supported video signal NTSC/PAL/SECAM, 480p/i, 720p, 1080p/i
Dimensions (W x H x D) 620 x 255 x 730 mm (24 13/32˝ x 10 1/32˝ x 28 3/4˝) (optional lens, legs and lens cover not included)
Weight*8 Approx. 41.0 kg (90.4 lbs) (optional lens not included)

Reviews

There are no reviews yet

Only logged in customers who have purchased this product may leave a review.