Home Audio Accessories
Blustream DA44AU 4×4 Dante? Digital Audio Converter
- Features 4 x analog audio inputs that are converted to a Dante? compatible signal
- Features conversion of 4x Dante? signals to analog audio outputs
- Analog audio inputs support both balanced and unbalanced audio + MIC line-level signals
- MIC line-level supports 48V phantom power
- Supports 44.1, 48 & 96kHz sample rates @ 24-bit
- Configurable Dante? device latency (supports 1, 2, or 5ms configurable using Dante? Controller)
- Independent input gain/output volume settings per channel
- Supports AES67 RTP audio transport
$1,899.00
Our DA44AU is a four input / four output Dante? digital audio converter. The DA44AU allows any non-Dante? audio source such as mixing consoles, amplifiers, computers and Blustream Matrix/distribution products to be connected as an audio source within a Dante? network, as well as converting a Dante? signal back to an analog audio signal. The DA44AU supports both balanced and unbalanced audio as well as microphone line-level inputs inc. 48V phantom power. The DA44AU supports AES67 RTP audio transport.
| Brand |
|---|
Audio Input Connectors: 12-PIN Phoenix connector (4ch balanced / unbalanced analogue audio / MIC)
Audio Output Connectors: 2 x RJ45, female (1Gb Dante™ network), 12-PIN Phoenix connector (4ch balanced / unbalanced analogue audio / MIC)
Casing Dimensions (W x H x D): 120mm x 23mm x 34m without feet
Operating Temperature: 32°F to 104°F (-5°C to +55°C)
Storage Temperature : -4°F to 140°F (-25°C to +70°C)
Power Supply: 12V/1A DC
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Home Audio Accessories
Rode VideoMicro Compact On-Camera Microphone
- The microphone body is made from aluminum, giving it a high level of RF rejection, and is finished in R?DE?s high-grade ceramic anti-glare black coating.
- Included with the VideoMicro is a camera shoe mount featuring a Rycote Lyre shock mount.
- Featuring a suspension structure composed of a hard-wearing thermoplastic, it is far more effective at minimising unwanted vibrations, handling and cable-borne noise than traditional elastic suspensions.
- Virtually indestructible, the Rycote Lyre will never sag, snap, wear out or require rethreading to maintain its effectiveness.
- Also included is the WS9 synthetic furry windshield with foam inner cell, designed for use in outdoor scenarios where wind and environmental noise can inhibit recordings.
- Optionally available is the R?DE SC7, a TRS to TRRS cable that allows the VideoMicro to be used with smartphones, to capture crystal clear, directional sound for video and video applications such as Periscope.
SKU: VMICRO -
Home Audio Accessories
Rode Stereo VideoMic X Broadcast-grade Stereo On-camera Microphone
- Acoustically matched true condenser capsules
- Rycote? Lyre onboard shock mounting
- Balanced professional XLR output
- Heavy-duty, lightweight aluminium construction
- High Pass Filter
- 9V or Phantom Power (P48 – via miniXLR)
- Level adjustment
- High Frequency Boost
- Includes SC2 TRS cable, pop shield and windshield
SKU: SVMX -
Home Audio Accessories
Rode VideoMic Pro
- Easily accessible on the rear face of the microphone are the power, filter and level controls. In addition to the microphone’s native 40Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
- Below these controls are the level settings, which attenuate or boost the recorded level as required.
- The -10dB level attenuation (or PAD) is ideal for recording loud sound sources, such as live music, motorsport, or interviews where the subject is very close to the camera.
- The +20dB level boost is designed for use with DSLR cameras, allowing the user to reduce the camera’s preamp level (or mic-input level), effectively reducing the amount of noise generated by the camera’s comparatively low quality audio circuitry.
- The microphone uses a standard sized shoe mount for on camera use, and features a 3/8″ thread in the base of the mount for easy boom pole mounting.
- The VideoMic pro is battery powered, and provides over 70 hours recording from a single 9V battery.
- The R?DE VideoMic is designed and made in Australia, and covered by R?DE Microphones’ industry leading 10 year warranty.
SKU: n/a -
Home Audio Accessories
Rode VideoMic Me
- It features an in-built 3.5mm TRRS output for plugging directly into a smartphone?s headphone socket.
- Its flexible mounting bracket accommodates a wide range of smartphones and allows the microphone to be fitted for primary camera or front camera (‘selfie’) use.
- A 3.5mm headphone jack on the rear allows for play-through of audio while recording (app dependent) as well as easy playback of your videos without having to remove the microphone.
- The VideoMic Me includes a deluxe furry windshield for shooting outdoors or in adverse weather.
SKU: VIDEOMICME -
Home Audio Accessories
Rode SM3-R Camera Shoe Shock Mount
- The SM3-R is equipped with dual Rycote Lyre mounts to ensure maximum isolation from any handling vibrations, four possible mounting points to suit the complete range of compatible R?DE on-camera microphones, and integrated cable management clip.
SKU: n/a
There are no reviews yet.