SpeakerCraft
Showing 1–30 of 55 results
- Home Speakers
Speakercraft ACC-DT7-1 Woofer
- The finest flush-mount speakers in the world are useless if they cannot be installed due to restrictions in a specific building’s walls or ceiling.
- It may be a matter of sound penetrating an adjoining wall, unique code restrictions, or simply the customer’s requirements.
- SpeakerCraft offers the AccuFit Series to address space limitations, building codes, and living environment concerns.
- The AccuFit series of shallow-depth, fully enclosed, architectural speakers ensures
- The drivers have the proper amount of air space to deliver the best sound performance regardless of the installation environment.
- This new line of technically advanced speakers will fit just about any installation application.
SKU: n/a - Home Speakers
Speakercraft AIM-WD1 Multi-room Speaker
- 3-Way, Fully Pivoting In-Ceiling Speaker featuring an 8? Woofer, Dual 2? Midranges and Dual 3/4? Tweeters
- Flangeless Appearance with Magnetically Attached Full Coverage Steel Grille
- Pivoting 8? Graphite Cone Woofer
- Dual 2? Graphite Inverted Dome Midrange Drivers
- Dual 3/4? Silk Dome Tweeters
- Front-Mounted Ambient/Wide Switch
- Timbre-Matched to All ONE Series Speakers
- Sensitivity: 88dB 1W/1m
- Power Handling: 125 Watts
- Impedance: 8 Ohm Compatible
- Frequency Response: 40Hz ? 20kHz
SKU: n/a - Home Speakers
Speakercraft AIM7-2 Speaker Pack
PROPRIETARY ARC TWEETER ARRAY ? DESIGN
- Uniform, aim-able high-frequency coverage.
- Lower crossover point through the increased number of drivers gives increased sound pressure level at the critical mid-range frequencies resulting in a sweeter sweet spot.
- Smoother power response, higher power handling capability and less distortion than a single tweeter design.
- New speaker housing design allows for a +/-15 degree pivoting woofer, totalling 30 degrees of adjustment, plus Arc-Tweeter Array with +/- 15-degree toe-in/toe-out adjustment, and 359 degrees of rotational flexibility.
EXCLUSIVE PATENTED DESIGN & ACOUSTIC ISOLATION TECHNOLOGY?
- Co-molded, lower density compounds minimize structural resonance in the surrounding wall/ceiling.
- Updated WavePlane design enhances high frequency dispersion.
- Acoustic Vortex Eliminators reduce sound turbulence.
U.S. ENGINEERED & DESIGNED TRANSDUCER, MOTOR, AND CROSS-OVER
- Increased stiffness of the curvilinear cone design enables the cone to deliver energy to the air more effectively for greater bass response.
- Butyl elastomer surround creates a more consistent sound with less disruption.
- Non-conductive Kapton formers, copper caps and extended poles reduce distortion.
- Improved power handling and sensitivity limits compression for a louder and cleaner sound.
- Symmetrical & A-symmetrical Linkwitz-Riley crossover designs for highest sound quality.
INNOVATIVE INDUSTRIAL DESIGN & MATERIALS
New Cone and Tweeter Materials:
- AIM 5, 7 & 8 TWO: Glass Fiber Woofer + Silk Dome Tweeters.
- AIM 5, 7 & 8 THREE: Aluminum Woofer + Aluminum Dome Tweeters.
- AIM 5, 7 & 8 FIVE: Kevlar? Fiber Woofer + Aluminum-Magnesium Dome Tweeters.
SKU: n/a - Home Speakers
Speakercraft AIM7-2 Sub Speaker Pack
Features:
- Pivoting and Rotating 7″ Resin Reinforced Fiberglass Cone Woofer
- Pivoting 1″ Silk Dome Tweeter
- Timbre-Matched to All Two Series Speakers
- Front Mounted Treble Equalization Switch
Vital V8 Floor Sub Details: When deep, tight bass is a requirement, reach for the Vital series and make a dramatic impression.
Features:
- Built-In 80 Watt Amplifier
- 8″ Long Throw Woofer
- Auto Power Via Signal Sensing
- Cabinet Top Mounted Recessed Volume Control
- Magnetically Shielded
- Frequency Response: 45Hz – 200Hz
- LFE (Low Frequency Effects) Input
- Overload Protection Circuit
SKU: n/a - Home Speakers
Speakercraft AIM7-2 Woofer
PROPRIETARY ARC TWEETER ARRAY ? DESIGN
- Uniform, aim-able high-frequency coverage.
- Lower crossover point through increased number of drivers gives increased sound pressure level at the critical
- mid-range frequencies resulting in a sweeter sweet spot.
- Smoother power response, higher power handling capability and less distortion than a single tweeter design.
- New speaker housing design allows for a +/-15 degree pivoting woofer, totaling 30 degrees of adjustment, plus
- Arc-Tweeter Array with +/- 15 degree toe-in/toe-out adjustment, and 359 degrees of rotational flexibility.
EXCLUSIVE PATENTED DESIGN & ACOUSTIC ISOLATION TECHNOLOGY?
- Co-molded, lower density compounds minimize structural resonance in the surrounding wall/ceiling.
- Updated WavePlane design enhances high frequency dispersion.
- Acoustic Vortex Eliminators reduce sound turbulence.
U.S. ENGINEERED & DESIGNED TRANSDUCER, MOTOR, AND CROSS-OVER
- Increased stiffness of the curvilinear cone design enables the cone to deliver energy to the air more effectively
- for greater bass response.
- Butyl elastomer surround creates a more consistent sound with less disruption.
- Non-conductive Kapton formers, copper caps and extended poles reduce distortion.
- Improved power handling and sensitivity limits compression for louder and cleaner sound.
- Symmetrical & A-symmetrical Linkwitz-Riley crossover designs for highest sound quality.
INNOVATIVE INDUSTRIAL DESIGN & MATERIALS
- New Cone and Tweeter Materials:
- AIM 5, 7 & 8 TWO: Glass Fiber Woofer + Silk Dome Tweeters.
- AIM 5, 7 & 8 THREE: Aluminum Woofer + Aluminum Dome Tweeters.
- AIM 5, 7 & 8 FIVE: Kevlar? Fiber Woofer + Aluminum-Magnesium Dome Tweeters.
- Back mounted grille assembly magnets improve aesthetics and longevity of grille assembly.
SKU: n/a - Home Speakers
Speakercraft AIM8-2 Room Speaker Pack
PROPRIETARY ARC TWEETER ARRAY ? DESIGN
- Uniform, aim-able high-frequency coverage.
- Lower crossover point through the increased number of drivers gives increased sound pressure level at the critical
- mid-range frequencies resulting in a sweeter sweet spot.
- Smoother power response, higher power handling capability and less distortion than a single tweeter design.
- New speaker housing design allows for a +/-15 degree pivoting woofer, totalling 30 degrees of adjustment, plus
- Arc-Tweeter Array with +/- 15-degree toe-in/toe-out adjustment, and 359 degrees of rotational flexibility.
EXCLUSIVE PATENTED DESIGN & ACOUSTIC ISOLATION TECHNOLOGY?
- Co-molded, lower density compounds minimize structural resonance in the surrounding wall/ceiling.
- Updated WavePlane design enhances high frequency dispersion.
- Acoustic Vortex Eliminators reduce sound turbulence.
U.S. ENGINEERED & DESIGNED TRANSDUCER, MOTOR, AND CROSS-OVER
- Increased stiffness of the curvilinear cone design enables the cone to deliver energy to the air more effectively for greater bass response.
- Butyl elastomer surround creates a more consistent sound with less disruption.
- Non-conductive Kapton formers, copper caps and extended poles reduce distortion.
- Improved power handling and sensitivity limits compression for a louder and cleaner sound.
- Symmetrical & A-symmetrical Linkwitz-Riley crossover designs for highest sound quality.
INNOVATIVE INDUSTRIAL DESIGN & MATERIALS
- New Cone and Tweeter Materials:
- AIM 5, 7 & 8 TWO: Glass Fiber Woofer + Silk Dome Tweeters.
- AIM 5, 7 & 8 THREE: Aluminum Woofer + Aluminum Dome Tweeters.
- AIM 5, 7 & 8 FIVE: Kevlar? Fiber Woofer + Aluminum-Magnesium Dome Tweeters.
- Back mounted grille assembly magnets improve aesthetics and longevity of grille assembly.
SKU: n/a - Home Speakers
Speakercraft AIM8-2 Sub Speaker Pack
- PROPRIETARY ARC TWEETER ARRAY ? DESIGN
Uniform, aim-able high-frequency coverage. - Lower crossover point through an increased number of drivers gives increased sound pressure level at the critical mid-range frequencies resulting in a sweeter sweet spot.
- Smoother power response, higher power handling capability and less distortion than a single tweeter design.
- New speaker housing design allows for a +/-15 degree pivoting woofer, totalling 30 degrees of adjustment, plus Arc-Tweeter Array with +/- 15-degree toe-in/toe-out adjustment, and 359 degrees of rotational flexibility.
EXCLUSIVE PATENTED DESIGN & ACOUSTIC ISOLATION TECHNOLOGY?
- Co-molded, lower density compounds minimize structural resonance in the surrounding wall/ceiling.
- Updated WavePlane design enhances high-frequency dispersion.
- Acoustic Vortex Eliminators reduce sound turbulence.
U.S. ENGINEERED & DESIGNED TRANSDUCER, MOTOR, AND CROSS-OVER
- Increased stiffness of the curvilinear cone design enables the cone to deliver energy to the air more effectively for greater bass response.
- Butyl elastomer surround creates a more consistent sound with less disruption.
- Non-conductive Kapton formers, copper caps and extended poles reduce distortion.
- Improved power handling and sensitivity limits compression for a louder and cleaner sound.
- Symmetrical & A-symmetrical Linkwitz-Riley crossover designs for highest sound quality.
INNOVATIVE INDUSTRIAL DESIGN & MATERIALS
- New Cone and Tweeter Materials:
- AIM 5, 7 & 8 TWO: Glass Fiber Woofer + Silk Dome Tweeters.
- AIM 5, 7 & 8 THREE: Aluminum Woofer + Aluminum Dome Tweeters.
- AIM 5, 7 & 8 FIVE: Kevlar? Fiber Woofer + Aluminum-Magnesium Dome Tweeters.
- Back mounted grille assembly magnets improve aesthetics and longevity of grille assembly.
SKU: n/a - PROPRIETARY ARC TWEETER ARRAY ? DESIGN
- Home Audio, Power Amplifiers, Receivers, Amps & Preamps
Speakercraft Bass Power 250 Mono Subwoofer Amplifier
Home Audio, Power Amplifiers, Receivers, Amps & PreampsSpeakercraft Bass Power 250 Mono Subwoofer Amplifier
- Specially designed and optimized to be an ideal companion to the Cinema Sub 10 and Cinema Sub 12 in-wall subwoofers
- The amplifier features Class-AB mono circuitry and delivers 250W of output for a strong, clear bass performance that makes your in-wall sub sound like a freestanding unit
- The automatic power on feature turns the amp on and off based on when it senses an audio signal
- A variable low-pass crossover from 50Hz to 150Hz lets you dial in the precise frequency needed to match your full-range speakers
- A 115/230V voltage switch is provided, and the amp meets UL, CE, and C-Tick certification for use in the US, Europe, and Australia
- The amplifier has feet for placement on a table or shelf, and also includes rack brackets for installation in a standard equipment rack
SKU: n/a - Home Speakers, Subwoofers
Speakercraft Boom Tomb Ground Subwoofer
- Designed to complement our wide variety of dedicated outdoor loudspeakers
- Bury this waterproof enclosure in the backyard, in a flower bed, at the edge of the lawn or near the pool
- Long excursion 10-inch woofer
- Vented through a hooded port
- Bass will support any number of Ruckus, Outdoor Elements or OG speakers
SKU: n/a































